CCNA (200-125) The Complete Course
About This Class
This course is for Cisco’s newest certification, the CCNA R/S 200-125, that became effective on August 21st, 2016.
This course was produced on September 27, 2016.
Laz’s courses are being taught in over 194 countries and some of these have been translated into other languages.
This is why he has become a rising star in Cisco certifications and Networking!
This is his latest course for the CCNA R/S and has everything you needs to prepare for the 200-125 certification exam.
The course was produced in a very effective manner where you, the student, would feel as if you are in a classroom setting and the instructor is speaking directly to YOU.
Following Laz’s instructions and using his recommendations for other resources like books, etc., has proven to be the key to lead his students to achieve success in passing the certification exam.
In Laz’s style of teaching, (and there is a method to his madness), is very laid back and somewhat unorthodox, as you will see for yourself.
However, this is to make the topics covered more digestible and easier for anyone to understand. Even if you are totally new to Networking.
So, whether you are a novice, need to pass the CCNA or just need a refresher for your current job, this course has everything you need.
Don’t doubt the Instructor with the proven record, but rather embrace his knowledge and his experience when it comes to this; after all…his reputation depends on your success!
You will acquire the knowledge in this course to make it transferable to real world use, as a Cisco and/or IT Professional.
DISCLAIMER: Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer & VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. But students have more options that those. They can create their own lab with real equipment, get BOSON or GNS3. It is up to each student to obtain the simulator/emulator of their choice to study along with this course. Please also NOTE: .pkt files have been up-loadable to UDEMY’s site via a ZIP folder. However, I would like to stress that replicating my labs will help students to practice, follow along and will drive down the information in a more precise manner where the students will retain more of the information for the test.
This course will give you an in-depth understanding of networking, using routers and switches and their various configurations and connections. You will learn how to configure; default, static and dynamic routing. You will comprehend how to manipulate each of the routing protocols attributes to meet the requirements of the network.
This course will also prepare you in Layer 2 technology and its various configurations, such as; VLAN’s, VTP, STP, PortFast, EtherChannel, Port-Security, Inter-VLAN communication & Trunking; plus the newest requirements needed for CISCO’s NEW CCNA (200-125) certification exam as well.
You will also acquire the knowledge needed to secure the routers through the use of Access-list, configuring the different types of NAT & will be able to manage the router’s components.
As a students, you will also be able to thoroughly grasp the concepts of both Internet Protocols; IPv4 & IPv6. These are KEY to any Network!
Please keep in mind that Laz has his own book called “The Only IP Book You Will Ever Need!” that will further help those that need a more in-depth understanding of IPv4 & IPv6.
Also covered in this course is Wide Area Network Protocols like HDLC, PPP, Frame Relay, HSRP, BGP, MPLS, NHRP, MGRE among other things.
You will also learn how to create redundancy in networks through the use of Redundancy Protocols such as HSRP which is just as important. Also, within the WAN, you, the student, will also learn how to create VPN’s and GRE Tunnels among other things that are crucial in passing the new CCNA.
Great achievements and success is at your grasp!
All you need to do is let this course guide you through it.
The possibilities are going to be endless once you take this CCNA certification course.
Course Features
- Lectures 149
- Quizzes 0
- Language English
- Students 0
- Certificate Yes
- Assessments Yes
-
Course
- 1. CCNA 200 125 Inroduction to the course
- 2. Introduction to TCP:IP Networking
- 3. Perspectives on Networking
- 4. The Application Layer of the TCP:IP Model
- 5. The Transport Layer of the TCP:IP Model
- 6. The Network Layer of the TCP:IP Model
- 7. The Link and Physical Layer of the TCP:IP Model
- 8. Summary of Section
- 9. The OSI Model
- 10. Comparing the OSI and TCP:IP Model
- 11. OSI Layers and their functions
- 12. OSI Layering Concepts and Benefits
- 13. Summary of Section 3
- 14. Cisco 3 Layer Model
- 15. Cisco Collapsed Architecture
- 16. Summary of Section 4
- 17. An Overview of LAN’s
- 18. Common Small Office Home Office LAN
- 19. Common Enterprise LAN
- 20. Ethernet Cabling Standards
- 21. Summary of Section 5
- 22. Devices used on an Ethernet Network
- 23. Summary of Section 6
- 24. Introduction to IPv4 Addressing
- 25. Format and Classes of an IPv4 Address
- 26. Classes and private IP Addressing
- 27. Summary of Section 7
- 28. Class Full Subnetting in IPv4
- 29. Subnetting a Class “C” Address
- 30. Subnetting a Class “B” Address
- 31. Subnetting a Class “A” Address
- 32. Summary of Section 8
- 33. VLSM
- 34. VLSM Breakdown
- 35. Creating a VLSM Network
- 36. Summary of Section 9
- 37. Route Summarization
- 38. Summarization Breakdown
- 39. Assigning the Summary Address
- 40. Summary of Section 10
- 41. Introduction to Cisco’s CLI
- 42. Navigation of the CLI
- 43. Cisco Router Components
- 44. Router Boot Sequence
- 45. Password Recovery Procedure
- 46. Router Administrative Commands
- 47. Router interface Commands
- 48. Summary of Section 11
- 49. Routing Packets in your network
- 50. Default Routing Lab
- 51. Static Routing Lab
- 52. Dynamic Routing
- 53. Configuring RIPv2
- 54. Passive Interface
- 56. RIPv2 Default Routes
- 55. Configuring the Passive Interface
- 57. Configuring RIPv2 Default Routes
- 58. Summary of Section 12
- 59. The EIGRP Routing Protocol
- 60. Basic Configuration of EIGRP
- 61. The EIGRP Topology Table
- 62. Successor asnd Feasible Successor Routes
- 63. The EIGRP Neighbor Table
- 64. Wildcards to Configure EIGRP
- 65. Tweaking the Bandwidth in EIGRP
- 66. Load Balancing with EIGRP
- 67. Summary of Section 13
- 68. All About OSPF
- 69. OSPF Basic Lab
- 70. Designated and Backup Router Lab
- 71. Multi Area OSPF Lab
- 72. OSPF Authentication Lab
- 73. Summary of Section 14
- 74. LAN Switching
- 75. Common Command on a Switch
- 76. The Spanning Tree Protocol
- 77. STP Election Process
- 78. Manipulation of STP
- 79. Summary of Section 15
- 80. Using Vlans in Our Network
- 81. VLAN Configuration
- 82. Using the Virtual Trunking Protocol
- 83. Trunking Ports on L2 Switches
- 84. Securing Ports on a Switch
- 85. Summary of Section 16
- 86. Inter VLAN Routing
- 87. Ether Channel
- 88. EtherChannel Configuration
- 89. Summary of Section 17
- 90. The Ins and Outs of IPv6
- 91. Assigning IPv6 Addresses to an Interface
- 92. Static Routing In IPv6
- 93. RIPng Configuration
- 94. EIGRPv6 Configuration
- 95. OSPFv3 Configuration
- 96. Dual Stack Routing
- 97. Subnetting in IPv6
- 98. Summary of Section
- 99. Unraveling Access List
- 100. Standard ACL Configuration
- 101. Standard ACL’s for Telnet
- 102. Extended ACL Configuration
- 103. Named ACL Configuration
- 104. Remark Command in an ACL
- 105. Summary of Section 19
- 106. Network Address Translation (NAT)
- 107. Configuring Nat Overload
- 108. Summary of Section 20
- 109. Welcome to WAN
- 110. Configuring PPP
- 111. Configuring Frame Relay
- 112. Configuring GRE Tunnels Lab
- 113. Radius Lab
- 114. TACACS Lab
- 115. IPSLA Lab
- 116. Summary of Section 21
- 117. Welcome to MPLS
- 118. The Basics of MPLS
- 119. MPLS VPN Layer 2
- 120. MPLS VPN Layer 3
- 121. Summary of Section
- 122. Introduction to BGP
- 123. Comparison eBGP VS iBGP Lab
- 124. Minimal eBGP
- 125. Summary of Section
- 126. Introduction to HSRP
- 127. HSRP Lab
- 128. Summary of Section
- 129. Intro to DMVPN
- 130. DMVPN Lab
- 131. VPN
- 132. Summary of Section
- 133. Introduction to IP Services
- 134. SNMP LAB
- 135. Summary of Section
- 136. Configuring DHCP
- 137. DHCP Relay Agent
- 138. Verifying DHCP on a Cisco IOS
- 139. Network Time Protocol (NTP)
- 141. Summary of Section
- 140. Resolving Hostnames
- 142. Introduction to Evolution of Intelligent Network
- 143. API’s
- 144. Cisco APIC EM
- 145. Summary of Section
- 146. Licensing a Cisco Router
- 147. Licensing Lab
- 148. Summary of Section
- 149. Summary of Course
